Simpson Strong-Tie Titen HD Mechanically Galvanized Heavy-Duty Screw Anchor

The Titen HD heavy-duty screw anchor is a mechanically galvanized high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. Its proprietary heat treatment and ASTM B695 Class 65 mechanically galvanized coating make it ideal for both interior and exterior anchoring applications.

The Titen HD screw anchor is designed for a wide variety of applications such as sill plates, ledgers, post bases, seating, and other holdown applications. The screw anchor is easy to remove for use in temporary applications such as bracing and formwork, or when a fixture needs to be relocated.

• Head-stamped for easy identification
• Serrated teeth on the tip facilitates cutting and reduces installation torque
• Thread design undercuts to efficiently transfer the load to the base material
• Standard fractional sizes, hole size equals anchor size
• Specialized heat-treating process creates tip hardness for better cutting without compromising ductility
• Hex washer head requires no separate washer, unless required by code
• Fully and easily removable
• Qualified for exterior applications

Specifications (all models)

• Material: Carbon Steel
• Finish: Mechanically Galvanized
• Install With: No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits

Available options (see each model for exact values)

• Length (in.): 1 7/8 to 12
• Diameter (in.): 1/4, 3/8, 1/2, 5/8, 3/4
• Thread Length (in.): 1 1/2, 2, 2 3/8, 2 1/2, 2 5/8, 3 1/8, 3 1/2, 3 5/8, 4 1/2, 5 1/2
• Threads per Inch: 2 1/4, 2 1/2, 3, 3 1/3
• Packaging Type: Box, Tub
• Wrench Size (in.): 3/8, 9/16, 3/4, 15/16, 1 1/8
• Recommended Fixture Hole Size (in.): 3/8 to 7/16, 1/2 to 9/16, 5/8 to 11/16, 3/4 to 13/16, 7/8 to 15/16
• Drill Bit Diameter (in.): 1/4, 3/8, 1/2, 5/8, 3/4
• Thread Pitch (mm): 5.08, 5.84, 6.92, 8.55
• Thread Pitch (in.): 0.27, 0.34, 0.4, 0.45

Caution: Caution: Use a Titen HD screw anchor one time only - installing the anchor multiple times may result in excessive thread wear and reduce load capacity