Simpson Strong-Tie SET-3G High-Strength Epoxy Adhesive
Regular price
$48.99
Sale price
Regular price
Shipping calculated at checkout.
SET-3G® is an epoxy-based anchoring adhesive with high design strength and proven performance. SET-3G is a 1:1 ratio, two-component, anchoring adhesive for concrete (cracked and uncracked) and masonry (cracked and uncracked). SET-3G installs and performs in a variety of environmental conditions and temperature extremes.
- Exceptional performance - superior bond strengths permit ductile solutions in high seismic areas.
- Design flexibility - improved sustained load performance at elevated temperature.
- Jobsite versatility - can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
- Recognized per ICC ES AC308 for post-installed rebar development and splice length design provisions.
- Approved for installation with multiple vacuum-drill bit systems without further hole cleaning. See Code Report (ESR-4057) and Engineering Letter for approved systems.
- Wire brush hole-cleaning system for conventional blow-brush-blow cleaning method for anchoring.
- With higher bond strengths, ductile solutions can often be achieved with SET-3G in high seismic areas.
- Low-odor formulation.
- Manufactured in the USA using global materials.
- During the installation of SET-3G, when the correct installation processes are followed, there is no performance difference between water-saturated concrete, water-filled holes, or submerged concrete.
- For use with potable water.
| Mix Ratio/Type | 1:1 epoxy |
| Mixed Color | Gray |
| Base Materials | Concrete and masonry - cracked and uncracked |
| Base Material Conditions | Dry, water-saturated, water-filled and submerged |
| Anchor Type | Threaded rod or rebar |
| Substrate Installation Temperature | 40°F (4°C) to 100°F (38°C) |
| In-Service Temperature Range | -40°F (-40°C) to 176°F (80°C) |
| Storage Temperature | 45°F (7°C) and 90°F (32°C) |
| Shelf Life | 24 months |
| Volatile Organic Compound (VOC) | 2 g/L |
Specifications (all models)
- Packaging Type: Cartridge
- Usage Temperature: Base-material temperatures must be 40°F (4°C) or above at the time of installation. For best results, adhesive should be conditioned to a temperature between 70°F (21°C) and 80°F (37°C) at the time of installation. To warm cold adhesive, store cartridges in a warm, uniformly heated area or storage container. Mixed material can harden in the dispensing nozzle within 30 minutes at 70°F (21°C).
- VOC: 1.9 grams/liter
- Storage Conditions: Store between 45°F (7°C) and 90°F (32°C)
Couldn't load pickup availability
Technical documents
Technical documents
- Canadian design values, CSA A23.3 (Simpson TEBC-A-2025, page 49)
- ICC-ES ESR-4057 code report (cracked concrete and seismic)
- All Simpson documents for this product (strongtie.com)
Opens the official document from Simpson Strong-Tie, ICC-ES, IAPMO, UL or FM in a new tab. Have the engineer of record confirm the design for your project.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
