Simpson Strong-Tie DHUTF Top-Flange Fire Wall Hanger

Engineered and tested to perform, Simpson Strong-Tie® hangers are manufactured to the highest quality standards for structural strength and safety. The DHUTF top-mount hanger is designed to carry joist floor loads to a wood stud wall over two layers of 5/8" gypsum board (drywall). This hanger installs after the drywall is in place.

• Available to order skewed up to 45°.
• Testing verifies that the DHUTF hangers do not reduce the two-hour fire wall assembly rating in either 2x4 or 2x6 walls.
• DHUTF fire wall hangers are code listed for structural use under ICC-ES ESR-2552.
• Hangers have been tested according to ASTM E814 and received F (flame) and T (temperature) ratings for use on one or both sides of the wall in Intertek Design No. SST/WPCF 120-01. If hangers are installed on both sides of the wall, then it must be a 2x6 wall.

Specifications (all models)

• Gauge: 12
• Finish: Zinc Galvanized, G90
• Dimension B (in.): 2 1/2
• Install With: Install with (2) 0.148 in. x 1-1/2 in. nails in the joist, (6) 0.148 in. x 1-1/2 in. nails in the top, and (8) 1/4 in. x 3-1/2 in. Strong Drive SDS Heavy-Duty Connector screws in the face (screws included)

Available options (see each model for exact values)

• Dimension W (in.): 1 9/16, 1 13/16, 2 1/8, 2 3/8, 2 9/16, 3 9/16
• Dimension H (in.): 9 1/8, 9 7/16, 11 1/8, 11 13/16, 13 15/16, 15 15/16, 17 15/16, 19 15/16, 21 15/16, 23 15/16